Quick Reckoner
Basic Measurement Converter(s)

Size: 
1 inch = 2.54 cm = 25.4 mm

Thickness: 
1 Micron = 4 gauge = 0.000040 Inch = 0.001000 MM = 0.039370 Mil

Abbreviations:
LDPE             = Low Density Polyethylene
LLDPE           = Linear Low Density Polyethylene
HMHDPE        = Higher Molecular Low Density Polyethylene
PP                 = Polypropylene
BOPP            = Biaxially Oriented Polypropylene

Typical Characteristics

LLDPE F19010 is a butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidant, antiblocking agent, slip additive and polymer processing aid. The grade is designed to make blown film for heavy duty applications and liquid packaging, where good toughness, impact strength and tear resistance are desired.

Property                                               Unit              Typical Value**
Density (23˚C)                                     g/cc             0.918
MFI (190˚C/2.16 Kg)                            g/10 min        0.900
Tensile strength at Yield (MD/TD)        MPa              12.5/12.0
Ultimate Tensile strength (MD/TD)       MPa              38.0/30.0
Elongation at Break (MD/TD)               %                 650/800
Dart Impact Strength, F50
(38 mm Dart, 66 cm Height)                  g/μm             3.5
Coefficient of Friction
Static                                                                      0.23
Dynamic                                                                  0.16
Gloss (60˚)                                           %                 80
Tear Strength (MD/TD)                       g/μm             3.3/10.3       
Applications                                         Slip, Anti Block Garde for Heavy Duty Film, Liquid Packaging.
Visibility                                               Translucent / Opaque

LDPE 24FS040 is a film grade Low Density Polyethylene (LDPE) produced by high pressure tubular process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer has been blended with necessary additives during manufacture to obtain good surface slip and easy open ability between two layers of the film.

Property                                                    Unit              Typical Value**
Density (23˚C)                                          g/cc             0.922
MFI (190˚C/2.16 Kg)                                 g/10 min        4
Tensile strength at Yield (MD/TD)            MPa              18.0/16.0
Elongation at Break (MD/TD)                    %                 250/400
Dart Impact Strength, F50
(38 mm Dart, 66 cm Height)                      g/μm             2.0
Applications                                              High Slip Grade for Shopping Bags, General Purpose Packaging.
Visibility                                           Translucent / Opaque

PP Repol H100EY is recommended for use in TQ (Tubular Water Quenched) Film. It contains slip and antiblock additives. It is an ideal material to use in textile over wraps, packaging of ready made garments, snack food, grocery and general purpose packaging.

Property                                                       Unit              Typical Value**
MFI (230˚C/2.16 Kg)                                    g/10 min        11
Tensile strength at Yield (50 MM / Min)       MPa              35
Elongation at Break (50 MM / Min)               %                 10
Flexural Modulus (1% secant)                     Mpa              1600
Notched Izod Impact Strength (23˚C)          J/m               26
Heat Deflection Temperature (455 kPa)      ˚C                104
Applications                                          Textile Over Wraps, Garment Bags, Snack Food Packaging.
Visibility                                            Clear / Crystal

* The information and data presented herein is true and correct to the best of our knowledge. No warranty or guarantee expressed or implied, is made regarding performance or otherwise. This information or data may not be considered as a suggestion to use our products without taking into account existing patents, or legal provisions or regulations, whether national or international.
** Typical vales (Mechanical) with the film made with 1mm die gap & 2.0 BUR. Typical Values Not to be taken as specifications.

Quality Policy




Lotus is an ISO 9001:2000 certified Company. We follow good manufacturing practices that assure consistent high quality results. We have instituted state-of-the-art facilities to monitor and maintain strict quality of our products, processes, and services.